Filter By:
- Bar Ends (4)
- BMX (3)
- Bottom Brackets (27)
- Brakes/Levers/Pads (86)
- Cables (24)
- Cassettes/Freewheels (31)
- Chainrings (24)
- Chains (54)
- Show More Categories
- Cranksets (22)
- Derailleurs (34)
- Forks (5)
- Groups (3)
- Handlebar Grips/Tape (43)
- Handlebars (7)
- Headsets (13)
- Pedals (58)
- Saddles (27)
- Seatposts (14)
- Shift/Brake Combinations (9)
- Shifters (20)
- Stems (11)
- Other (165)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance.
- All calipers have 74mm mounting bolt spacing
- For use with long cable-pull levers
- Pad retraction and spring tension are adjustable
- Includes steel-backed sintered pads
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Long Pull
- Hub/Disc Compatibility: 6-Bolt
- Rotor Included: No
To keep your Avid Trail brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a retaining bolt are included (enough for one brake) in each pad set. And, there's an aluminum backing plate option if you're really counting the grams.
$8.00
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
$16.99 - $30.00
$21.00 - $30.00
Up to 19% Off
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$25.00 - $33.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$30.00 - $38.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$13.99
- Comfortable and durable kraton rubber with a classic micro diamond knurled surface
- 130mm length with closed end and BMX style flange
$16.99
- Bottom bracket for one-piece crank
- Sealed mechanism
- 24 TPI
- Spindle Type: One piece
- Cup Material: Steel
- Weight: 310-315g
- Cup Type: Press Fit
- Cup OD/Bearing OD: 51mm
Step up to premium performance of your road brakes with this upgraded kit that includes all parts needed for incredibly smooth performance.
- This premium kit is for the performance rider looking for incredibly smooth braking;
- Compatible with road brake systems;
- Ultra-low-friction cables are 2300mm and 1700mm long, for front and rear road brakes
- Black compressionless housing includes low-friction Pro lube and is 3000mm long
- Kit includes low-friction Pro brake ferrules, frame protectors, and cable end caps
- Included stainless steel cables are rust-proof and come pre-stretched
These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars.
- Required for bar end use on Satellite Plus Isozone bars
- For use with clamp style bar ends
- Includes 2 adapters and 2 rubber handlebar inserts.
- Bar end sold separately
$39.99
Rail harder and faster on the berms behind a stem that stays steady on every trail. The Line 35 stem pairs perfectly with your aggressive riding style. Constructed of strong and light aluminum, it's the ultimate in oversized performance.
- Oversized 35mm clamp diameter provides a new level of strength and weight savings
- Forged from 6061-T6 3D aluminum
- Laser etched calibration marks make dialing in the perfect angle simple and repeatable
- Available in a wide range of sizes for today's mountain rider
- Safe for carbon bars
$91.99
Make sure your fit is dialed in your race against the clock! Bontrager's Speed Concept Stem allows you to set up your Speed Concept bike for proper ergonomics and aerodynamics. Plus, the precisely integrated design keeps your super aero bike fast and looking pro!
- Low-Near = 17° rise / 77mm length
- Low-Far = 100° rise / 110mm length
- Mid-Near = 50° rise / 67mm length
- Mid-Far = 45° rise / 110mm length
- High-Near = 80° rise / 67mm length
- High-Far = 75° rise / 110mm length
$99.99
Comfortable performance for road or trail
Arvada Comp adds comfort and reduces soft tissue pressure by creating a strategic cut-out in the saddle shell. This allows the softer finishing material across the shell cut-out to be more compliant, resulting in added comfort for the rider. With Arvada Comp, you get the benefits of a cut-out saddle with the classic look and feel of a more traditional design.
Key features
- Performance Posture 3 for pelvic rotation with a balance of comfort and efficiency
- Channel Flex on bottom of shell for added compliance
- Zone Density shell construction is strategically placed for optimal comfort and performance
- Size Specific Curvature ensures each saddle is designed specific to its width
- inForm BioDynamic products optimize your natural movement for sustained, higher performance
$124.99 - $188.99
$188.99
Up to 34% Off
The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversized 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain.
- Pro-level quality handlebar in oversized 35mm clamp diameter offers increased strength and minimal weight
- 27.5mm high rise helps you dial in the perfect hand position
- Brake and shifter lever position lines for spot-on control setup
- 40mm of cut marks on each side for easy width customization
- OCLV Carbon construction is the benchmark for durability and light weight
$209.99
Bontrager's Speed Concept Seatpost lets you get your fit dialed before your next triathlon or time trial. It's crafted from OCLV carbon and the one-bolt head provides simple adjustments. Different offsets allow you to customize your riding position for superior ergonomics and aerodynamics.
$140.00
Leave it up to Brooks to improve on a classic. The B17 Imperial features a design that dates back to 1890, with a pressure reducing cutout that ensures your comfort in the miles to come. And, of course, the B17 Imperial features Brooks' full-grain, premium leather, and trademark rivets for the ultimate in comfort, style, and durability.
$65.00
Ultra-Link Chains designed to maximize performance with Campagnolo drivetrains, while increasing durability and power transmission.
- Delivers extremely high performance levels and durability over time
- Design is optimized to perform with teeth on sprockets and crowns of Chorus drivetrain components
- Solid pins are aligned with the external surface for smoothness and precision
- 5.15mm width is designed to produce faster and lighter shifting
Specifications:
- Links: 110
- Chain Connection Type: Pressed Pin
- Half Link Chain: No
- Drivetrain Speeds: 12
- Weight: 241g
$75.90
$78.00
3% Off
Campagnolo's Record 11-Speed Chain is the right choice for Campagnolo 11-speed drivetrains. This fine chain is engineered for excellent strength, long wear and brilliant shifting thanks to a unidirectional design and an anti-friction treatment that lets it glide across your cassette. It also boasts hollow pins to keep your bicycle as light as possible.
$89.95 - $107.95
While the greatest focus is generally given to the moving parts of the groupset, the drivetrain is not complete without the cassette. And a Campagnolo groupset is not complete without an extremely efficient, reliable, and high-performance cassette. This is why the Centaur groupset offers high-quality solutions to meet the needs of even the most demanding cyclist.
- Built with one steel triplet and 8 steel single sprockets.
- Includes lockring
- Weight: 291g
$94.45
Compatible only with Record or Chorus square taper cranks. Features three cartridge bearings and a chromoly steel spindle.
- 3 sealed cartridge bearings, 2 on the drive side, 1 on the non-drive side
- Removable cups are machined from 7000 series aluminum
- Unique taper is not compatible with Shimano
- Weight: 220 grams
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$1.59
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$5.99
Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal.
- Compatible with 41mm and 42mm OD upper bearings
$9.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 41 and 42mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Durable steel construction
$9.99
$11.00
9% Off
Simple, economical threadless post mount caliper brake pads.
- Rubber compound improves performance over many OE pads
$10.82
• Replacement hoods for road brake levers with traditional, non-aero cable routing
• Soft, tacky rubber for a sure grip
• Available in black or brown
$11.50
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 41 and 42mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Lightweight aluminum construction
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 40mm (1-1/2") tapered steerer tubes
- Durable steel construction
$18.00
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$26.50
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cartridge
• Color: Black
• Crown Race: 30
• Defined Color: Black
• Lower Stack Height: 2 mm
• S.H.I.S Lower: IS41
• S.H.I.S Upper: IS41
• S.H.I.S. Stem Clamp Diameter: 28.6
• Upper Stack Height: 7 mm
• Weight: 65 g
$30.00
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$43.50
Put your hands on Cane Creek's SCR-5 Brake Levers. With comfortable hoods and lightweight aluminum levers, the SCR-5s are the perfect choice for your non-geared bike. There's a brake release button on the lever which facilitates easier wheel changes.
$44.99
This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
$60.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS41/28.6/H9/K|IS52/40/H1
• Top Type: IS - Integrated
• Top Head Tube Inside Dia.: 41.1mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 9mm (Short), 15mm (Tall)
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: IS - Integrated
• Bottom Head Tube Inside Dia.: 52.1mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 1mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 87g
$75.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6/H8\EC49/40/K
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 49.61mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 97g
$19.00 - $20.90
Cinelli Cork tape is available in many colors and includes plugs.
- Plugs included
$24.99
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy.
Pedal Refresh Kit includes:
-Enduro catridge bearings
- Igus LL-glide bearings
- Double seal system (internal and external seals)
- Hex alloy end caps
- O-rings
- Nuts
- Sleeve bushings
- Bearing removal tool
Compatible with the following pedals (2010-present):
- Eggbeaters
- Candys
- Mallets
- 5050s
$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
- SPD compatibility
- Weight (pair): 30g
- Float: 6 degrees
- Release angle: 15 or 20 degrees
$26.99
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability.
- Weight (pair): 30 grams
- Shoe compatibility: SPD
- Release angle: 15 degrees
$49.99 - $54.99
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: US 5-10 // EU 37-43
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair
$59.99
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
- Spindle material: Forged scm 435 chromoly steel
- Body material: One piece composite
- Wing material: Stamped steel
- Spring material: 300 series stainless steel
- Release angle: 15° / 20°
- Q-factor: 52mm
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Cleat: Premium brass cleats with shims included
- Weight: 294g per pair
- Warranty: 5 years
$59.99
Choose to ride flat or clipped in for city commutes and casual rides around town. This hybrid composite pedal with its 2-sided entry allows you to do both. It features premium bearings and a double seal system, diamond plate pads for traction, and molded pins and ribs for grip.
- Premium brass cleats with shims included
- Q-factor: 57mm
- Release angle: 15° / 20°
- Forged 435 Chromoly steel spindle
- 300 series stainless steel spring
- 5-year warranty
- 331g per pair
$59.99
Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.
$79.99 - $99.99
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface.
Details
- Optimal surface area
- Minimal profile 16mm thin
- 10 adjustable 8mm pins per side for grip
- 10mm pins available for purchase here
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU)
- Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU)
- Serviceable, pedal refresh kit available
Specs
- Adjustable pins: 10 per side
- Body Material: A380 Aluminum
- Endcap: T15
- Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large)
- Inner Bearing Type: Igus Bearing
- Max Rider Weight: No restriction
- Outer Bearing Type: Double Cartridge Bearing
- Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large)
- Spindle Material: Forged SCM 415 Chromoly Steel
- Warranty: 5 years
- Weight: 439g per pair (Small), 494g per pair (Large)
$99.99
The Mallet 2 pedal from Crank Brothers is ready to drop the hammer. No, seriously, this thing has been redesigned and rebuilt from the ground up, and it's a whole new creature. Durability and a lightweight aluminum body take the center stage in this versatile pedal that's equally at home shredding singletrack and providing a platform for your sneakers while you ride to class. The Mallet 2 offers a flat pedal feel and clipped-in control simultaneously for the best of both worlds and performance you can feel. And, with a customizable float and release angle, your body will thank you with miles and miles of fun.
$104.99
You've got flat shoes and shoes with cleats. Are you really gonna let your pedals tell you which ones you can wear? Crank Brothers' hybrid-style Double Shot is a flat and clipless pedal to suit your every pedaling whim. Molded pins and ribs offer superior grip, and diamond plate pads are supremely tactile. You've got entry from either side of the pedal, so that's two chances per revolution to catch. Thanks to the wide, platform-style body, though, you'll keep moving even if you don't.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: A380 aluminum
- wing material: 17-4PH stainless
- spring material: 300 series stainless steel
- release angle: 15° / 20°
- q-factor: 52mm
- inner bearing type: igus LL-glide bearing
- outer bearing type: enduro cartridge bearing
- cleat: premium brass cleats with shims included
- weight: 395g per pair
$119.99 - $129.99
Size specific magnesium platform pedal provides optimal shoe/pedal interface.
Details
- Magnesium pedal body for weight reduction
- Optimal surface area
- Minimal body profile - 16mm thin
- Concave pin profile & 10 adjustable pins per side for grip
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Serviceable, pedal refresh kit found here
Specs
- Adjustable pins: 10 per side
- Body material: AM60B Magnesium Alloy
- Endcap: T15
- Footprint: 114mm x 111mm
- Inner bearing type: Igus Bearing
- Max rider weight: No restriction
- Outer bearing type: Double Cartridge Bearing
- Shoe size: US 10-15 // EU 43-49
- Spindle material: Forged SCM 415 Chromoly Steel
- Warranty: 5 years
- Weight: 386g per pair
$135.00
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.
$150.00 - $189.99
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: forged 6061-T6
- inner bearing type: igus LL-glide bearing
- outer bearing type: igus LL-glide bearing
- footprint: 100mm x 100mm (small) / 114mm x 111mm (large)
- adjustable pins: 10 per side
- minimal profile: 11mm-13mm thin
- stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- weight: 375g per pair (small) / 405g per pair (large)
$165.00 - $169.00
Competition-oriented and customizable for refined fit, feel, and power transfer.
Details
- Durable alloy body
- Durable cast steel wings
- Integrated traction pad technology to optimize the shoe/pedal interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- Hex alloy endcap and bashguard
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
Specs
- Body Material: 6061-T6 aluminum
- Cleats: Premium brass cleats with shims included
- Endcap: Hex alloy
- Inner Bearing Type: Igus LL-glide bearing
- Max Rider Weight: No restriction
- Outer Bearing Type: Enduro cartridge bearing
- Q-factor: 52mm
- Release Angle: 15° / 20°
- Spindle Material: Forged scm 435 chromoly steel
- Spring Material: 300 series stainless steel
- Warranty: 5 years
- Weight: 320g per pair
- Wing Material: 17-4PH stainless
$29.99
A nylon evolution of DMR's V12 body design. Equipped with the same concave footprint and narrow profile DMR pedals are known for, while spinning on a Dual DU bushing system to provide the value of a plastic pedal with a thoughtful approach to increased durability.
- Chromoly axle
- Dual DU bushing system
- Full-length 6mm off-road pins for added grip
$20.00
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6803 Bearing
$89.99
DEITY Racepoint handlebars must pass DEITY specific impact and stress testing based on the rate of deflection product goes through in real world situations. This is just the beginning, every DEITY handlebar also undergoes a rigorous 12 to 24 month real world testing process under the most abusive riders in the world. Gradient Butting Technology allows DEITY to put material where we need it and not where we don’t, delivering a significantly stronger handlebar at a similar weight to other bars.
- Intended use: Enduro and DH
$91.99
Brendan Fairclough's signature handlebar is an homage to the effortless style, grace, and speed exemplified by Brendan's every move. The BF800 Brendog signature handlebar, which has been developed and tested on the World Cup DH circuit for almost three years to perfect the feel he demands for World Cup-caliber speed.
Creating the perfect combination of rise, width, bends, sweep, flex, and responsive damping is not an easy task, but DEITY has perfected the ability to deliver the best-feeling handlebars with unparalleled strength time-and-time again.
Utilizing Brendan's preferred 8-degree backsweep with our favorite 5-degree upsweep gives this bar a more aggressive positioning to attack the gnarliest DH trails in the world. At an 800mm width and featuring a 30mm rise, our proprietary Gradient Butting Technology coupled with our Mono Heat Treatment Procedure delivers a handlebar that is more than 20% stronger than any other handlebar from our competition at this weight category.
We guarantee you will look as good as Brendan riding his signature BF800 Brendog Handlebar while you're pushing your limits to match his speed and style! So get your hands on DEITY's latest and greatest rider collaboration, designed to elevate your ride to podium status!
- The Brendan Fairclough Signature Handlebar
- Designed for DH / Enduro / All MTN applications
- Developed and tested rigorously for nearly 3 years on the World Cup DH circuit
- Incredibly detailed two-tone bead blast and polished ano finish
- Brendog signature 8-degree bend / backsweep by 5-degree upsweep
- 800mm width
- Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology
- Mono Heat Treatment Procedure for increased strength
- Stiffness for tracking yet compliant for endless chatter and big hits
- Wider center bore spacing for unrivaled stability
- Designed for maximum ride quality with a 31.8mm bore
- Alignment control markers for perfect set up and spacing of your levers
- Features measured cut marks and center alignment detail
- Black ano finish with color graphics
- Covered by our Lifetime Crash Replacement Policy to the original owner
- 30mm rise (343 grams)
$29.99
- HexAir Technology is a breakthrough in saddle comfort featuring patent pending hexagonal, air pockets and specially treated outer layer to provide a non-stick surface
- Easily stretches over most racing and touring saddles
- Silicone with a hexagonal air pocket grid design is fully waterproof and UV resistant
- Available in two sizes for racing and touring saddles
- -01: Racing saddles, 5.5" wide; -02: Comfort/Touring saddles, 6.6" wide
$38.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards.
- Shot-peened finish
- 6061-T6 Aluminum
- 9-deg backsweep
- 720mm wide
- 35mm rise
$9.99
Dimension Junior Pedals.
- Molded nylon, 1-piece, caged-type pedals
- Built-in reflectors, will not accept toe clips
- Overall pedal size is 80 x 60mm
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Platform
- Spindle Material: Chromoly Steel
- Weight: 230g (9/16-inch); 304g (1/2-inch)
Page 1 of 12
Next page