Tires/Tubes

The new Vittoria Mazza combines years of athlete input with cutting-edge tread technology, raising the bar on the mixed terrain Enduro tire category. Starting with a defined center tread, the Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs, making Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction, while also accelerating mud clearing. Cornering on the Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. Simply put, bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable, confident, and communicative feel at the limit of cornering. Mazza's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. The bar has been raised. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe width for tactile grip on rocks and roots - Stepped leading-edge center-tread maintains speed and delivers climbing traction

Enduro-inspired performance meets XC efficiency—for your e-bike! By borrowing the best traits from the popular Martello, Barzo, and Gato models, the Agarro utilizes proven technologies from both the Enduro and XC categories. This combination of performance is ideal for the Trail category, as it provides predictable grip and efficiency in a mix of conditions. - Graphene 2.0 compound reduces rolling resistance and increases range and battery life - Leading-edge steps for fast-rolling while still climbing better in technical terrain at slow speeds - Progressive sipe width for tactile grip on rocks and roots

e-Martello hammers home the performance you expect, while extending your ride. Looking for the one tire to tackle a wide range of courses? This is the ticket. e-Martello features a 4C Graphene compound combined with a moto-inspired tread design and progressive width siping. This design provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that riders expect. Whether shredding rocks, roots, or mixed terrain, e-Martello delivers.

Value priced smooth tread tire ready to handle just about any repair job. - Mountain tire designed for riding on blacktop or concrete - Semi Slick design with low rolling resistance

There are a lot of bikes designed for 650c/571mm tires, but only very narrow widths have typically been available in this size. So, we made one! The Terry Tellus is the first 650c tire offered in a 28mm width. The PT version improves on the original Tellus by adding protection technology which provides a nearly impenetrable layer of tire protection – 3 times more puncture resistance than a Kevlar-belted tire of the same approximate weight. - Maximum inflation pressure 107 psi - Weight 317.5 grams (11.2 ounces) - 650 x 28c (28-571)

- Size: 14 x 1.5 – 2.25 - ISO Width: 44 – 55mm - ISO Diameter: 254 / 14" - Wall Thickness: 0.9 - Shaft Type: Smooth - Valve: Standard Schrader - Valve Core: Removable - Tube Compound: Butyl

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)

- Size: 700c x 18 – 23 - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 18mm, 19mm, 20mm, 21mm, 22mm, 23mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 100g (32mm), 101g (48mm & 60mm), 103g (80mm)

The Teravail Standard Schrader and Presta Valve tubes feature our widest variety of tube sizes and valve lengths with a proven record of high quality control and consistent availability. - 0.9mm wall thickness - Removable Presta valve core - Teravail Standard packaging features environmentally friendly soy ink printing on recycled cardboard - Size: 700c x 30 – 43 - ISO Diameter: 622 / road / 29" - ISO Width: 30 – 43mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 140g

- Low Lead Valve - ISO Diameter: 203 / 12.5 - ISO Width (mm): 57mm - Labeled Size: 12 x 2-1/4 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth

- Low Lead Valve - ISO Diameter: 305 / 16" BMX - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 76g (1.25-1.5), 92g (1.5-1.75), 102g (1.75-2.125)

- ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Shaft: Threaded - Valve Core: Removable

- ISO Diameter: 406 / 20" BMX - Wall Thickness: 0.9mm - Tube Compound: Butyl - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- Labeled Size: 24 x 1 - ISO Diameter: 540 / Wheelchair - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta Short 32-40mm - Shaft Type: Threaded - Valve Core: Removable - Weight: 83g

- Size: 26 x 1.5 – 1.75 - ISO Diameter: 559 / 26" mtn , 584 / 650b / 27.5" - ISO Width: 33mm, 34mm, 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm, 44mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight 152g (32mm), 158g (48mm)

- Size: 26 x 1.9 – 2.125 - ISO Diameter: 559 / 26" mtn - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 170g (32mm), 171g (48mm)

- ISO Diameter: 559 / 26" MTN - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Labeled Size: 26 x 1.9-2.125 - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Shaft: Smooth

- ISO Diameter: 584 / 650b / 27.5" - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded

- ISO Diameter: 622 / Road / 29" - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Shaft Type: Threaded - Valve Core: Removable

- Size: 29 x 1.9 – 2.3 - ISO Diameter: 622 / road / 29" - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 226g

- Size: 650B x 35 – 43 - ISO Diameter: 584 / 650b / 27.5" - ISO Width: 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 83g

- Size: 650c x 18 – 23 - ISO Diameter: 571 / 650c - ISO Width: 18mm, 19mm, 20mm, 21mm, 22mm, 23mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 89-92g

- Size: 700c x 28 – 32 - ISO Diameter: 622 / road / 29" - ISO Width: 28mm, 29mm, 30mm, 31mm, 32mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 128g (32mm), 129g (48 & 60mm)

- Size: 700c x 40 – 45 - ISO Diameter: 622 / road / 29" - ISO Width: 40mm, 41mm, 42mm, 43mm, 45mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 188g (32mm), 189g (48mm)

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth - Weight: 110g (23-25mm), 128g (28-32mm), 144g (35-43mm), 160g (40-45mm)

- Low Lead Valve - ISO Diameter: 355 - ISO Width: 44mm , 45mm , 46mm , 47mm , 48mm , 49mm , 50mm , 51mm , 52mm , 53mm , 54mm - Labeled Size: 18 x 1.75-2.125 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 118g

- Low Lead Valve - ISO Diameter: 540 / wheelchair - ISO Width (mm): 35mm - Labeled Size: 24 x 1-3/8 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 124g

- Size: 700c x 23 – 25 - ISO Diameter: 622 / road / 29" - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 125g (32mm), 126g (48 & 60mm), 128g (80mm)

- ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Labeled Size: 27.5 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Schrader

- ISO Diameter: 622 / road / 29" - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Size: 29 x 1.9-2.3 - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Shaft: Smooth

- Size: 700c x 23 – 25 - ISO Diameter: 622 / road / 29" - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 92g (32mm), 94g (48mm), 96g (60mm), 98g (80mm)

- Labeled Size: 12-1/2 x 1.75 – 2.125 - ISO Width: 47mm – 62mm - ISO Diameter: 203 / 12.5" - Shaft Type: Smooth - Flat Protection: Thorn Resistant - Valve: Standard Schrader - Valve Core: Removable - Tube Compound: Butyl

- Low Lead Valve - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 507 / 24" BMX - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Labeled Size: 24 x 1.9-2.125 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 600g

- Size: 29 x 2.1 – 2.3 - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 54mm, 55mm, 56mm, 57mm, 58mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 681g

- 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 368g (28-32), 438g (35-43)

- Labeled Size: 26 x 3.5 – 4 - ISO Width: 88mm – 100mm - ISO Diameter: 559 / 26" MTN - Shaft Type: Threaded - Valve: Standard Schrader - Valve Core: Removable - Wall Thickess: 1 - Tube Compound: Butyl - Weight: 500

Tannus Armour is the ultimate in tire protection and performance for all levels and styles of riding. Sitting between your tire and inner tube, the Tannus Armour provides 15mm of puncture protection on the top, as well as 2mm of sidewall protection from sharp objects and rocks. Whether you are a city biker, adventure tourer or prefer the off-road, downhill or gravel trails, Tannus Armour gives you increased grip and vibration dampening for a smoother, more comfortable and enjoyable ride. - Patented Aither Technology; Aither is a multi-cell foam compound that forms the structure of the Armour

The Knard is a tire that just makes sense. With its tightly-spaced, low-block tread pattern, it provides the perfect ratio of traction and low rolling resistance. It grips well on all sorts of different surfaces and will haul some sausage on hardpack terrain or groomed trails. If you want a tire that has a little less bite and a bit more speed but don't want to sacrifice traction, look no further.

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Removable valve core - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve Type: Presta - Valve Core: Removable - Butyl rubber - Wall Thickness: 4.3mm

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead - Size: 14 x 2.125

The MTB Alpha Bite is a classic mountain bike tire with large, widely spaced knobs. Excellent for use on hardpack, mud or loose sand.

- Balloon tire with grooved tread - Large air volume for added shock absorption - Wire bead - Size: 26 x 2.125

A classic MTB tire with large, widely spaced knobs suitable for all conditions. - ISO: 507 - Bead: Wire - PSI: 65

- Recreational tire with horizontal grooves for traction - Size: 26 x 1 3/8 - ISO 597

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires

- Tubeless Valve compatible with Stan's ZTR rim - Sold as a pair

- Quick sealing and stop punctures up to 1/4 inch - Can be used year around - -09: Box of 12 bottles

The X-One is now available in a “mud-version” with even coarser tread. The Cross specialist for the real muddy days. - Folding Bead - OneStar Compound and MicroSkin Casing

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. - Decreased air loss design - Butyl rubber - 40mm valve length

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. - Decreased air loss design - Butyl rubber - 40mm valve length

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. Special quality control that prevents unpleasant surprises. - 40mm valve length

Wrap around directional tread design, knurled for improved traction. - Quality rubber compound - Wrap around directional tread design - Knurled for improved traction - 65 PSI rated

Prevents thorns and other road debris from puncturing the inner tube and deflating the tire. - Packaged in a process that avoids the difficult to install "pigtails" traditionally associated with liners - Equipped with Soft-Tips that prevent friction flats at the overlapping seam - Sold in pairs

The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.